Aurora MR16 Accent Square Beveled 2.0
- Specification Sheet (.pdf)
- Component Ordering Codes (.pdf)
- Installation Features Drawing (.pdf)
- Installation Instructions (.pdf)
- Wiring Overview (.pdf)
- Installation Video
Description: Specification grade, recessed, adjustable accent fixture for plaster or drywall construction. The flush mounted rigid plaster plate, which is finished into the ceiling, maintains a flat finish and secures the removable flush beveled trim. The beveled trim raises the 2" (50mm) aperture above the ceiling plane and combining the Aurora dome with the tilt gear hidden behind the lamp creates a clean internal look. Suitable for wet locations with optional lens.
1. Lamp:
MR16 12V 50W IR (infrared, equal to 75W halogen) (not included)
2. Adjustability:
Hot aiming with Philips screwdriver offers 0 to 42 degrees
vertical adjustment and 362 degree horizontal rotation without beam clipping
(see lamp chart). Precision machined gear adjustment is concealed behind the
lamp. Features self locking tilt and manual locking horizontal rotation.
3. Housing:
AH1 IC and air-tight construction, .040" (1mm) thick die formed
aluminum. Suitable for remodel and new construction.
4. Dome:
Spun aluminum, anodized to a soft haze finish. Hides electrical
hardware and tilts for easy access to junction box and transformer.
5. Plaster Plate:
11 7/8" (301mm) x 9 1/4" (235mm) x 1/8" (3mm) aluminum
plaster plate, primed and mounted flush with ceiling. Apply Durabond®* ceiling
compound at the perimeter of the housing. Compatible only with traditional,
level 5 surface finishing, not self-leveling, PVA primer systems.
6. Mounting:
Self leveling u-shape telescoping hanger bars extend to allow
mounting between studs 13 1/4" - 24" (336-609mm) O.C. Mounting is suitable
for new and remodel commercial or residential drywall construction. Designed
to accommodate ceiling thickness from 1/2" (13mm) to 1 1/4" (32mm). Notch
and label marking for laser alignment.
7. Trim:
Die-cast and precision-machined aluminum 3.5" (89mm) trim with a
2" (50mm) aperture. Flush beveled trim mounts with a precision snap-fit into
the plaster plate. Finished with white non-gloss powder-coat paint or satin
aluminum, bronze or black finishes. Wet location lens #LWET available as an
accessory.
8. Snoot/Back Shield:
Machined aluminum snoot and die formed
aluminum back shield controls internal spill light. The snoot carries the lamp, a
soft focus lens (included) and two optional accessories. Relamp by pulling
snoot, which is secured by 5 bullet catches.
9. Electrical:
Standard torroidal magnetic transformer rated for 75W load at
120V 60Hz includes integral thermal protection and potting for noise reduction.
Secondary output voltage is 11.8 volts. (Electronic USA & international versions:
120V, 230V, 277V). High temperature socket features pure nickel contacts. Total
power consumed with load and transformer loss 55 watts 120 volts. Spring clip
allows transformer to be easily removed.
Dimmer Type:
Dimmer must be compatible with magnetic low-voltage
transformers except for electronic USA & international voltage versions.
Label: UL, C-UL and CE listed for damp location or wet location when used
with glass lens accessory #LWET. 42W max when used with accessory lens.
Weight:
18.75lbs (8.5kg)
Accessories:
Lenses and individual components (see accessories page).
Protected by patent #7,476,008
Aurora Ordering Code for Complete Fixture:
120V Standard Magnetic:
| Collection IC Housing |
Function Plaster Plate |
2.0" Aperture Trim Finish |
||
| AH1 | - | ASB | - | SB2W |
| Aurora Halogen 1 - MR16 |
Accent Square Beveled |
SB2W - White SB2SA - Satin Aluminum SB2SZ - Satin Bronze SB2SB - Satin Black |
Electronic USA and International Versions:
| Collection IC Housing-Voltage |
Function Plaster Plate |
2.0" Aperture Trim Finish |
||||
| AH1-1 | - | ASB | - | SB2W | ||
|
Accent Square Beveled |
SB2W - White SB2SA - Satin Aluminum SB2SZ - Satin Bronze SB2SB - Satin Black |
*Durabond® brand is a trademark of USG Corporation.