Aurora MR16 Accent Round Edge 3.3

Share on Facebook Google
Aurora Gear Cover Aurora Gear Cover
Soraa MR16 LED Lamps Soraa MR16 LED Lamps

View Specifications

Specification grade, recessed, adjustable accent fixture for plaster or drywall construction. The flush mounted rigid plaster plate, which is finished into the ceiling, maintains a flat finish and defines the Truly Trimless Pure edge (knife edge) 3.3" (84mm) aperture. Combined with the Aurora dome and the tilt gear hidden behind the lamp creates a clean internal look.


MR16 12V 71W max for magnetic/50W max for electronic.


Hot aiming with Philips screwdriver offers 0 to 45 degrees vertical adjustment and 362 degree horizontal rotation without beam clipping (see lamp chart). Precision machined gear adjustment is concealed behind the lamp. Features self locking tilt and manual locking horizontal rotation.


AH2 IC and air-tight construction, .040" (1mm) thick die formed aluminum. Suitable for remodel and new construction.


Spun aluminum, anodized to a soft haze finish. Hides electrical hardware and tilts for easy access to junction box and transformer.

Plaster Plate:

14 3/4" (375mm) x 12 1/8" (307mm) x 1/8" (3mm) aluminum plaster plate, primed and mounted flush with ceiling. Apply Durabond®* ceiling compound at the perimeter of the housing. Compatible only with traditional, level 5 surface finishing, not self-leveling, PVA primer systems.


Self leveling u-shape telescoping hanger bars extend to allow mounting between studs 13 1/4" - 24" (336-609 mm) O.C. Mounting is suitable for new and remodel commercial or residential drywall construction. Designed to accommodate ceiling thickness from 1/2" (13mm) to 1 1/4" (32mm). Notch and label marking for laser alignment.

Truly Trimless:

No trim to remove, just a clean knife edge. Aperture is integral to the plaster plate, which is mounted flush with the ceiling.

Snoot/Back Light Shield:

Machined aluminum snoot and die formed aluminum back shield controls internal spill light. The snoot carries the lamp, a soft focus lens (included) and two optional accessories. Relamp by pulling snoot, which is secured by 5 bullet catches.


Standard torroidal magnetic transformer rated for 75W load at 120V 60Hz includes integral thermal protection and potting for noise reduction. Secondary output voltage is 11.8 volts. (Electronic USA & international versions: 50W max 120V, 230V, 277V). High temperature socket features pure nickel contacts. Total power consumed with load and transformer loss 78 watts 120 volts. Spring clip allows transformer to be easily removed.

Dimmer Type:

Dimmer must be compatible with magnetic low-voltage transformers except for electronic USA & international voltage versions.


ETL listed for damp location.


23.5lbs (10.65kg)

Protected by patent #7,476,008

Limited Quantities Available. Please call for more information.



Ordering Code

Aurora Ordering Code for Complete Fixture:

120V Standard Magnetic:

IC Housing
Truly Trimless
Plaster Plate
AH2 - ARE3
2 - MR16
Round Edge
3.3" Aperture

Electronic USA and International Versions:

IC Housing-Voltage
Truly Trimless
Plaster Plate
AH2-1 - ARE3
2 - MR16
1 - 120V 60HZ
2 - 230V 50HZ
3 - 277V 60HZ
Round Edge
3.3" Aperture

*Durabond® brand is a trademark of USG Corporation.

Facebook Twitter Pintrest Houzz YouTube Instagram Google +