Specification grade recessed plaster-in (drywall) flangeless, flush wall wash fixture. Trim offers no-glare aperture and ultra uniform field of light to top of wall. Mounts at 32" (813mm) center to center and 40" (1016mm) from center to wall.
MR16 12v 50W IR Lamp (infrared, equal to 75W Halogen), maximum.
AH6 IC and air tight construction, 19 gauge die formed aluminum. Suitable for remodel and new construction.
11 7/8" (301mm) x 9 1/4" (235 mm) x 1/8" (3mm) aluminum plaster plate, primed and mounted flush with ceiling. Apply Durabond ceiling compound at the perimeter of the housing. Compatible only with traditional, level 5 surface finishing, not self-leveling, PVA primer systems.
Self leveling telescoping mounting bars extend to allow mounting between studs 16"-24" (406-609mm) O.C. Mounting hardware is suitable for new and remodel commercial or residential drywall construction. Designed to accommodate ceiling thickness from 1/2" (13mm) to 1 1/4" (32mm). Notch marking for laser alignment.
Die-cast and precision-machined aluminum 3 1/2" (89mm) aperture. Flangeless, flush square trim with precision snap-fit into the plaster plate.
Precision cut aluminum with silver haze, brushed bronze, white or black finish.
Supplied with frosted prismatic lens to provide smooth beam patterns.
Standard 75W 120V 60Hz torroidal magnetic transformer includes integral thermal protection and potting for noise reduction. Spring clip allows transformer to be easily removed or interchanged to electronic through the aperture. Primary leads 120V (Electronic & international versions: 120V, 230V, 277V). Secondary output voltage is 11.8 volts. Socket pure nickel contacts.
Dimmer must be compatible with low-voltage magnetic transformer except for electronic & international selection.
UL, C-UL and CE listed for dry or wet location with wet location lens accessory #LWET
Lenses and additional parts (see accessories page).