|Aurora Gear Cover|
|Soraa Vivid MR16 LED Lamps|
|Green Creative MR16 LED Lamps|
|TCP MR16 LED Lamps|
Specification grade, recessed, adjustable accent fixture for plaster or drywall construction. The flush mounted rigid plaster plate, which is finished into the ceiling, maintains a flat finish and secures the removable flush beveled trim. The beveled trim raises the 2" (50mm) aperture above the ceiling plane. Combining the Aurora dome with the tilt gear hidden behind the lamp creates a clean internal look. Suitable for wet locations with an optional wet location lens.
MR16 LED 7W–9W 12VAC, equivalent to 50W or 65W halogen.
10, 15, 25 or 36 degree beam spread options. Lamps sold separately. Only use LED
retrofit lamps designed for use in enclosed fixtures.
See www.purelighting.com for a list of recommended lamps.
Hot-aiming with #2 Phillips screwdriver offers vertical adjustment of 0 to 42 degrees and 362 degree horizontal rotation without beam clipping. Precision machined gear adjustment is concealed behind the lamp. Features self locking tilt and manual locking horizontal rotation.
.040" (1mm) thick die formed aluminum. Includes 12V 15W electronic low voltage transformer for MR16 LED. IC and air-tight, suitable for remodel or new construction.
Spun aluminum, anodized to a soft haze finish. Hides electrical hardware and tilts for easy access to junction box and transformer.
11 7/8" (301mm) x 9 1/4" (235mm) x 1/8" (3mm) aluminum plaster plate, primed and mounted flush with ceiling. Apply Durabond®* ceiling compound at the perimeter of the housing. Use the supplied ultra-thin FibaTape®**. This prevents chipping and cracking at the trim aperture, which is common with other trimless fixtures.
Self leveling u-shape telescoping hanger bars extend to allow mounting between studs 13 1/4" - 24" (336-609 mm) O.C. Mounting is suitable for new and remodel commercial or residential drywall construction. Designed to accommodate ceiling thickness from 1/2" (13mm) to 1 1/4" (32mm). Notch and label marking for laser alignment.
Precision-machined aluminum 3.5" trim with a beveled 2" aperture. Flangeless, flush trim installs into the plaster plate with a precision snap-fit. Wet location lens, LWET, is available as an accessory for wet locations.
Machined aluminum snoot controls internal spill light. The snoot secures the lamp to the Pan Tilt Mechanism and allows for easy relamping.
120VAC (standard), 230VAC, or 277VAC input, 12VAC 15W MAX output.
Compatible with most ELV dimmers. Refer to lamping specs for list of compatible dimmers.
Protected by Patent Number 7,476,008.