Verge channel emits ambient illumination to soften the aesthetic of a space, imparting a sense of harmony and tranquility. Verge provides illumination to create a floating wall effect. The slim, plaster-in aluminum channel with 4" paintable aluminum backer plate houses a single row of high CRI, commercial-grade white or color changing LEDs. The 24VDC linear LED system mounts directly to studs without joist modification and plasters into 5/8" or thicker drywall. Verge channel is sold in 5 foot increments up to 40 feet and may be field-cut to any length. LED Soft Strip may be cut every 2.4 inches. Coordinate installation with electrician and drywall contractors. Fixture includes a 5 year warranty. ETL listed.
Indoor Only—Toe-kicks, cove lighting and floating wall effects for hospitality, retail and residential environments. For ceiling, door frames and corners, use other types of Verge.
White LED system, compatible Electronic Low Voltage Dimming (ELV) 120VAC input:
24V ELV Power Supply Comparison Chart (.pdf)
PSB-60W-ELV-24VDC (60W output)
PSB-100W-ELV-24VDC (96W output)
PSB-2X100W-ELV-24VDC (2X96W output)
PSB-3X100W-ELV-24VDC (3X96W output)
PSB-4X100W-ELV-24VDC (4X96W output)
White LED system, compatible 0-10 Volt Dimming (010) 120-277VAC input:
0-10V Power Supply Comparison Chart (.pdf)
PSB-96W-010-24VDC (96W output)
PSB-2X96W-010-24VDC (2X96W output)
PSB-3X96W-010-24VDC (3X96W output)
PSB-4X96W-010-24VDC (4X96W output)
In-Wall Mounting Kits:
RGB and RGBW LED System:
PSB-100W-24VDC-RGB (100W output)
PSB-2X100W-24VDC-RGB (2X100W output)
PSB-3X100W-24VDC-RGB (3X100W output)
PSB-4X100W-24VDC-RGB (4X100W output)
ELV Dimmers: Legrand: Adorne ADTH700RMTU ; Lutron: DIVA DVELV-300P, Skylark SELV-300P and Maestro MAELV-600.
010V Dimmers: Lutron: Radio Ra2 (with grx-tvi), Grafik Eye Qs (with GRX-TVI), Diva (with PP20); Nova T; Philips: Sunrise SR1200ZTUNV; Leviton: IP710-DL
RGB Controls: Touch Screen Controller with Power Supply (CTP), or Color Dial Controller with Power Supply (CDP).
Verge channel, LED Soft Strip, Verge Junction Box, counter sink bit to mount extrusion and backer plate, all required mounting hardware and paintable aluminum backer plate. See page 2 of specification sheet for additional details.
For custom design and layout assistance, send drawings to firstname.lastname@example.org